- Place of Origin: Beijing, China (Mainland)
- Brand Name: Daelim
- Model Number: S(F)9 S(F)10 S(F)11
- Usage: Power
- Phase: Three
- Coil Structure: Toroidal
- Coil Number: 2 Winding
- Rated voltage: 132KV
- Rated capacity: 1000MVA
- Frequency: 50Hz/60Hz
- Type: Three Phase
- Certification: ISO&ONAF C57.12
- Standard: IEC60076
- Material: Copper Winding
- Cooling System: ONAN&ONAF
- Connection Symbol: YNd11
- Output Symbol: 6.3KV 6.6KV 10.5KV 11KV
Packaging & Delivery
|Packaging Details:||International standard package ,proper for any special customer air or sea requirements,one set one case|
High Quality Outdoor 3 Phase 1000mva 100000KVA OLTC 132KV Power Transformer
220kv,110KV and 66kv low-loss series transformer is our independently new generation of transformers on the basis of absorption of domestic and foreign advanced technology ,which features low local discharge ,low loss,low noise ,high reliability ,strong protection against abrupt short circuit .its excellent performance has been recognized by wide users and highly appraised by experts .The full-sealed suspending-cover free products sell well nationwide.
The high-voltage coil adopts an interleaved structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed .All stays and pads are chamfered to keep highly reliable insulation .
In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding and the hot points of the winding and prolong the service life of insulation.The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding,effectively lower the axial
The core is made of high-permeable grain-orientated top quality cold –rolled silicon sheet and the material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burrs controlled within 0.02mm.
The silicon sheet fabrication adopts “no-upper yoke-lapped ”technology and all lapped joints of the silicon sheet are 45°full-miters.The laminated core sheets are integrally pressed and adhered with epoxy resin to make the three –leg two –yoke core a strong and flat integral one with good verticality precision,this effectively improves no-load performance and reduces noise.
|Main Technical Parameters for 110KV level S(F)Z9,S(F)Z10,S(F)Z11 Series three-phase Two Winding Non-excitation-tap-changing power transformer|
|No-load loss(KW)||On-load loss(KW)||No-load Current %|
Our products include: Power transformer, Circuit breaker, Disconnector switch,.Current transformer & Potential transformer which are wildly applied to power station, transformer substaion, power distribution station.